May 3, 2023

Changing your vehicle’s oil is a vital part of regular car maintenance, but it can be an intimidating task if you’ve never done it before. But, Bennington Nissan wants you to know that you don’t have to be a professional to give your vehicle a fresh start this Spring! We’ve compiled a DIY guide to make changing your car’s oil easier than ever! Follow the steps below:

Bennington Nissan’s Guide To Changing Your Vehicle’s Oil: 

Gather the Necessary Tools and Materials

  • Before you get started, you’ll need to gather some tools and materials, including a jack and jack stands, an oil filter wrench, a drain pan, a funnel, and the correct type and amount of oil for your vehicle.

Locate the Oil Filter and Drain Plug

  • The oil filter and drain plug are typically located on the bottom of the engine. Consult your owner’s manual or a repair manual to locate these components.

Drain the Old Oil

  • Place the drain pan under the drain plug and remove the plug using a wrench. Allow the old oil to drain out completely.

Replace the Oil Filter

  • Using the oil filter wrench, remove the old oil filter and replace it with a new one. Be sure to lubricate the new filter’s gasket with some fresh oil before installing it.

Refill with New Oil

  • Use the funnel to refill the engine with the correct amount and type of oil specified in your owner’s manual.

Start the Engine and Check for Leaks

  • Start the engine and let it run for a few minutes. Check for any leaks or other issues.

Dispose of the Old Oil Properly

  • Be sure to dispose of the old oil in an environmentally friendly way, such as taking it to a recycling center or an oil change shop that offers oil recycling services.

By following these steps, you can change your vehicle’s oil with confidence and keep your car running smoothly.